A string is a sequence
A string is a sequence of characters. You can access the characters one at a time with the bracket operator:
>>> fruit = 'banana' >>> letter = fruit
The second statement extracts the character at index position 1 from
fruit variable and assigns it to the
The expression in brackets is called an index. The index indicates which character in the sequence you want (hence the name).
But you might not get what you expect:
>>> print(letter) a
For most people, the first letter of “banana” is “b”, not “a”. But in Python, the index is an offset from the beginning of the string, and the offset of the first letter is zero.
>>> letter = fruit >>> print(letter) b
So “b” is the 0th letter (“zero-th”) of “banana”, “a” is the 1th letter (“one-th”), and “n” is the 2th (“two-th”) letter.
You can use any expression, including variables and operators, as an index, but the value of the index has to be an integer. Otherwise you get:
>>> letter = fruit[1.5] TypeError: string indices must be integers
Getting the length of
a string using
len is a built-in function that returns the number of
characters in a string:
>>> fruit = 'banana' >>> len(fruit) 6
To get the last letter of a string, you might be tempted to try something like this:
>>> length = len(fruit) >>> last = fruit[length] IndexError: string index out of range
The reason for the
IndexError is that there is no letter
in “banana” with the index 6. Since we started counting at zero, the six
letters are numbered 0 to 5. To get the last character, you have to
subtract 1 from
>>> last = fruit[length-1] >>> print(last) a
Alternatively, you can use negative indices, which count backward
from the end of the string. The expression
the last letter,
fruit[-2] yields the second to last, and
Traversal through a string with a loop
A lot of computations involve processing a string one character at a
time. Often they start at the beginning, select each character in turn,
do something to it, and continue until the end. This pattern of
processing is called a traversal. One way to write a traversal
is with a
= 0 index while index < len(fruit): = fruit[index] letter print(letter) = index + 1 index
This loop traverses the string and displays each letter on a line by
itself. The loop condition is
index < len(fruit), so
index is equal to the length of the string, the
condition is false, and the body of the loop is not executed. The last
character accessed is the one with the index
which is the last character in the string.
Exercise 1: Write a
while loop that starts at
the last character in the string and works its way backwards to the
first character in the string, printing each letter on a separate line,
Another way to write a traversal is with a
for char in fruit: print(char)
Each time through the loop, the next character in the string is
assigned to the variable
char. The loop continues until no
characters are left.
A segment of a string is called a slice. Selecting a slice is similar to selecting a character:
>>> s = 'Monty Python' >>> print(s[0:5]) Monty>>> print(s[6:12]) Python
The operator [n:m] returns the part of the string from the “n-th” character to the “m-th” character, including the first but excluding the last.
If you omit the first index (before the colon), the slice starts at the beginning of the string. If you omit the second index, the slice goes to the end of the string:
>>> fruit = 'banana' >>> fruit[:3] 'ban' >>> fruit[3:] 'ana'
If the first index is greater than or equal to the second the result is an empty string, represented by two quotation marks:
>>> fruit = 'banana' >>> fruit[3:3] ''
An empty string contains no characters and has length 0, but other than that, it is the same as any other string.
Exercise 2: Given that
fruit is a string, what
Strings are immutable
It is tempting to use the operator on the left side of an assignment, with the intention of changing a character in a string. For example:
>>> greeting = 'Hello, world!' >>> greeting = 'J' TypeError: 'str' object does not support item assignment
The “object” in this case is the string and the “item” is the character you tried to assign. For now, an object is the same thing as a value, but we will refine that definition later. An item is one of the values in a sequence.
The reason for the error is that strings are immutable, which means you can’t change an existing string. The best you can do is create a new string that is a variation on the original:
>>> greeting = 'Hello, world!' >>> new_greeting = 'J' + greeting[1:] >>> print(new_greeting) !Jello, world
This example concatenates a new first letter onto a slice of
greeting. It has no effect on the original string.
Looping and counting
The following program counts the number of times the letter “a” appears in a string:
= 'banana' word = 0 count for letter in word: if letter == 'a': = count + 1 count print(count)
This program demonstrates another pattern of computation called a
counter. The variable
count is initialized to 0
and then incremented each time an “a” is found. When the loop exits,
count contains the result: the total number of a’s.
Exercise 3: Encapsulate this code in a function named
count, and generalize it so that it accepts the string and
the letter as arguments.
in is a boolean operator that takes two strings
True if the first appears as a substring in the
>>> 'a' in 'banana' True >>> 'seed' in 'banana' False
The comparison operators work on strings. To see if two strings are equal:
if word == 'banana': print('All right, bananas.')
Other comparison operations are useful for putting words in alphabetical order:
if word < 'banana': print('Your word,' + word + ', comes before banana.') elif word > 'banana': print('Your word,' + word + ', comes after banana.') else: print('All right, bananas.')
Python does not handle uppercase and lowercase letters the same way that people do. All the uppercase letters come before all the lowercase letters, so:
Your word, Pineapple, comes before banana.
A common way to address this problem is to convert strings to a standard format, such as all lowercase, before performing the comparison. Keep that in mind in case you have to defend yourself against a man armed with a Pineapple.
Strings are an example of Python objects. An object contains both data (the actual string itself) and methods, which are effectively functions that are built into the object and are available to any instance of the object.
Python has a function called
dir which lists the methods
available for an object. The
type function shows the type
of an object and the
dir function shows the available
>>> stuff = 'Hello world' >>> type(stuff) <class 'str'> >>> dir(stuff) 'capitalize', 'casefold', 'center', 'count', 'encode', ['endswith', 'expandtabs', 'find', 'format', 'format_map', 'index', 'isalnum', 'isalpha', 'isdecimal', 'isdigit', 'isidentifier', 'islower', 'isnumeric', 'isprintable', 'isspace', 'istitle', 'isupper', 'join', 'ljust', 'lower', 'lstrip', 'maketrans', 'partition', 'replace', 'rfind', 'rindex', 'rjust', 'rpartition', 'rsplit', 'rstrip', 'split', 'splitlines', 'startswith', 'strip', 'swapcase', 'title', 'translate', 'upper', 'zfill'] >>> help(str.capitalize) Help on method_descriptor: capitalize(...)-> str S.capitalize() Return a capitalized version of S, i.e. make the first characterand the rest lower case. have upper case >>>
dir function lists the methods, and you can
help to get some simple documentation on a method, a
better source of documentation for string methods would be https://docs.python.org/library/stdtypes.html#string-methods.
Calling a method is similar to calling a function (it takes arguments and returns a value) but the syntax is different. We call a method by appending the method name to the variable name using the period as a delimiter.
For example, the method
upper takes a string and returns
a new string with all uppercase letters:
Instead of the function syntax
upper(word), it uses the
>>> word = 'banana' >>> new_word = word.upper() >>> print(new_word) BANANA
This form of dot notation specifies the name of the method,
upper, and the name of the string to apply the method to,
word. The empty parentheses indicate that this method takes
A method call is called an invocation; in this case, we
would say that we are invoking
upper on the
For example, there is a string method named
searches for the position of one string within another:
>>> word = 'banana' >>> index = word.find('a') >>> print(index) 1
In this example, we invoke
pass the letter we are looking for as a parameter.
find method can find substrings as well as
>>> word.find('na') 2
It can take as a second argument the index where it should start:
>>> word.find('na', 3) 4
One common task is to remove white space (spaces, tabs, or newlines)
from the beginning and end of a string using the
>>> line = ' Here we go ' >>> line.strip() 'Here we go'
Some methods such as startswith return boolean values.
>>> line = 'Have a nice day' >>> line.startswith('Have') True >>> line.startswith('h') False
You will note that
startswith requires case to match, so
sometimes we take a line and map it all to lowercase before we do any
checking using the
>>> line = 'Have a nice day' >>> line.startswith('h') False >>> line.lower() 'have a nice day' >>> line.lower().startswith('h') True
In the last example, the method
lower is called and then
startswith to see if the resulting lowercase string
starts with the letter “h”. As long as we are careful with the order, we
can make multiple method calls in a single expression.
Exercise 4: There is a string method called
count that is similar to the function in the previous
exercise. Read the documentation of this method at:
Write an invocation that counts the number of times the letter a occurs in “banana”.
Often, we want to look into a string and find a substring. For example if we were presented a series of lines formatted as follows:
Sat Jan 5 09:14:16 2008
and we wanted to pull out only the second half of the address (i.e.,
uct.ac.za) from each line, we can do this by using the
find method and string slicing.
First, we will find the position of the at-sign in the string. Then we will find the position of the first space after the at-sign. And then we will use string slicing to extract the portion of the string which we are looking for.
>>> data = 'From [email protected] Sat Jan 5 09:14:16 2008' >>> atpos = data.find('@') >>> print(atpos) 21 >>> sppos = data.find(' ',atpos) >>> print(sppos) 31 >>> host = data[atpos+1:sppos] >>> print(host) uct.ac.za>>>
We use a version of the
find method which allows us to
specify a position in the string where we want
start looking. When we slice, we extract the characters from “one beyond
the at-sign through up to but not including the space
The documentation for the
find method is available
The format operator,
% allows us to construct
strings, replacing parts of the strings with the data stored in
variables. When applied to integers,
% is the modulus
operator. But when the first operand is a string,
% is the
The first operand is the format string, which contains one or more format sequences that specify how the second operand is formatted. The result is a string.
For example, the format sequence
%d means that the
second operand should be formatted as an integer (“d” stands for
>>> camels = 42 >>> '%d' % camels '42'
The result is the string ‘42’, which is not to be confused with the integer value 42.
A format sequence can appear anywhere in the string, so you can embed a value in a sentence:
>>> camels = 42 >>> 'I have spotted %d camels.' % camels 'I have spotted 42 camels.'
If there is more than one format sequence in the string, the second argument has to be a tuple1. Each format sequence is matched with an element of the tuple, in order.
The following example uses
%d to format an integer,
%g to format a floating-point number (don’t ask why), and
%s to format a string:
>>> 'In %d years I have spotted %g %s.' % (3, 0.1, 'camels') 'In 3 years I have spotted 0.1 camels.'
The number of elements in the tuple must match the number of format sequences in the string. The types of the elements also must match the format sequences:
>>> '%d %d %d' % (1, 2) TypeError: not enough arguments for format string >>> '%d' % 'dollars' TypeError: %d format: a number is required, not str
In the first example, there aren’t enough elements; in the second, the element is the wrong type.
The format operator is powerful, but it can be difficult to use. You can read more about it at
A skill that you should cultivate as you program is always asking yourself, “What could go wrong here?” or alternatively, “What crazy thing might our user do to crash our (seemingly) perfect program?”
For example, look at the program which we used to demonstrate the
while loop in the chapter on iteration:
Look what happens when the user enters an empty line of input:
> hello there hello there> # don't print this > print this! print this! > Traceback (most recent call last):"copytildone.py", line 3, in <module> File if line == '#': IndexError: string index out of range
The code works fine until it is presented an empty line. Then there is no zero-th character, so we get a traceback. There are two solutions to this to make line three “safe” even if the line is empty.
One possibility is to simply use the
False if the string is empty.
Another way is to safely write the
if statement using
the guardian pattern and make sure the second logical
expression is evaluated only where there is at least one character in
if len(line) > 0 and line == '#':
- A variable used to count something, usually initialized to zero and then incremented.
- empty string
- A string with no characters and length 0, represented by two quotation marks.
- format operator
%, that takes a format string and a tuple and generates a string that includes the elements of the tuple formatted as specified by the format string.
- format sequence
A sequence of characters in a format string, like
%d, that specifies how a value should be formatted.
- format string
- A string, used with the format operator, that contains format sequences.
- A boolean variable used to indicate whether a condition is true or false.
- A statement that calls a method.
- The property of a sequence whose items cannot be assigned.
- An integer value used to select an item in a sequence, such as a character in a string.
- One of the values in a sequence.
- A function that is associated with an object and called using dot notation.
- Something a variable can refer to. For now, you can use “object” and “value” interchangeably.
- A pattern of traversal that stops when it finds what it is looking for.
- An ordered set; that is, a set of values where each value is identified by an integer index.
- A part of a string specified by a range of indices.
- To iterate through the items in a sequence, performing a similar operation on each.
Exercise 5: Take the following Python code that stores a string:
str = 'X-DSPAM-Confidence:
find and string slicing to extract the
portion of the string after the colon character and then use the
float function to convert the extracted string into a
floating point number.
Exercise 6: Read the documentation of the string methods at
You might want to experiment with some of them to make sure you
understand how they work.
are particularly useful.
The documentation uses a syntax that might be confusing. For
find(sub[, start[, end]]), the brackets
indicate optional arguments. So
sub is required, but
start is optional, and if you include
end is optional.